Published at Monday, 27 August 2018. Floating Shelves. By Jami Gallagher.
Floating shelves that we just finished so this rock sample of this manner - and this is copper - all come from my dad and so I'm building a display shelf the floating shelf. To display all my samples of rocks and minerals have comes from my dad. These are fond memories from every rock shop that we stopped that along the way on all vacations, all the things we hated to do and when we're young, we have fond memories of today.
So we have five of these in one direction and three and the other. So, rather than show you every piece that cut I'll just show you a couple of them to save some time. So here are my original plans when I created the thoughts of building this floating shelf, so that I drew this green as the inside part that is screwed to the wall and said I'll build a little inside frame here, one in the center and another box over here and then the pink part was the outside skeleton that is covered in plywood, and I would have these as supports in here.
Here I am ripping a 2x4 into several strips everything to be one-inch square, so we can build the inside of our support brackets. So from one line of two-by-six, I get for one-inch square rails, two by six right there, six foot long. So I'm now ripping the strips that I have that are 1x1 square into seven-inch pieces because the depth of my shelf is going to be eight inches and I having a half lap for that one inch for a total of eight inches. Now I'm cutting the inside of pieces for the half lap that will go for the overlap for the pieces and the inside frame.
Any content, trademark’s, or other material that might be found on the kristinreiter.com website that is not kristinreiter.com’s property remains the copyright of its respective owner/s. In no way does kristinreiter.com claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2019 kristinreiter.com. All Rights Reserved.