Published at Thursday, October 18th 2018. by Cheryl Boyle in Floating Shelves.
Floating shelf with hidden storage and under mount LED. The wood I end up using was wood left over from my office desk bill. I had just enough left over for me to cut two 12-inch panels from that stash. I bought a piece of oak that was about three inches longer than the panel itself and I cut off one of the ends had a 45-degree angle dent to the other side.
Mark that and then cut that to a 45-degree angle, I cut two trims to cover the edge of the panel, only miter in one side, a sandwich. The two panels together to find out the depth of the spaces I need. Then I ripped a piece of wood on the table, saw I mark and cut spacers down to size with the biscuit joiner, I cut the face trim and only one of the side trim. Add the glue, insert the biscuit and join the two with my term router.
I notched out a track to insert the LED strip over on the router table. I use a horse nose bit to taper off the bottom of the trim to use as a pull handle to secure the top panel to the trim, a mark location for the pocket holes before screwing the panels
Any content, trademark’s, or other material that might be found on the kristinreiter.com website that is not kristinreiter.com’s property remains the copyright of its respective owner/s. In no way does kristinreiter.com claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2019 kristinreiter.com. All Rights Reserved.