Published at Monday, 27 August 2018. Floating Shelves. By Jordan Mills.
It was time to make the shelf. I took two pieces of wood and attached them with a mending plate after the shelf was together. I place it on the corner, braces and secured it with some screws through the bottom of each one. These shelves are pretty sturdy, but I wouldn't recommend placing anything extremely heavy on them. Next, I'm going to show you how to make this really cute watercolor piece.
You will need a small canvas letter, stickers, watercolors and a paintbrush for this. I spelled out good vibes with my stickers and then I use some watercolor paint and paint it on and around the letters when the paint was dry. I removed the stickers and ended up with this really cool looking piece. Next, I'm going to show you how to make a wire cactus. You will need wire, a small clay, pot, glue, gun tape, paper, and a sharpie. I started by drawing the shape of the cactus. I want it on a piece of paper, then I took some wire and start to bend it to the shape I drew.
Decorative floating shelves. You can make these whatever size you'd like, but I'm going to leave the exact measurements and parts that. You will need a wooden board, ripped plastic anchors corner braces, mending plates screws, a screwdriver and a drill, I've drilled, four holes two on each wall, then because there were no beams where I drilled, I placed an anchor in the holes and followed with screwing on a corner, brace after all, four were in place.
Any content, trademark’s, or other material that might be found on the kristinreiter.com website that is not kristinreiter.com’s property remains the copyright of its respective owner/s. In no way does kristinreiter.com claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2018 kristinreiter.com. All Rights Reserved.