Published at Wednesday, October 17th 2018. by Tanisha Thomas in Floating Shelves.
Some floating shelves with lighting and a fireplace mantel so stick around and see how I get it done shop apprentice and I agree that the wide belt sander is the coolest tool in the boardroom. Over the years, I've picked up a few tips on how to deal with raw materials, both hardwood, and plywood. First, when I order my materials, I ask that the plywood goes in first and the hardwood goes in second and when unloading the hardwood, I like to stack similar size boards together in second unload, your plywood onto some sort of a cart with wheels.
And if you don't have a full-size truck or van get yourself, a circular saw and cut down your sheet goods in the parking lot of wherever you purchase the materials for cabinet projects. I use a design, software called eat cabinets and it helps me produce drawings as well as this here, which is called a diagram, and this is really just a roadmap to help me break down the sheet goods as efficiently as possible.
That's the smaller saw, blade in front of the main saw blade, and it is designed to cut the bottom of a panel before the main saw blade. It comes through and cuts it, and this creates a real clean cut top and bottom, and a sliding table saw is very much like a regular table saw except it has this carriage attached to the side of it that slides forwards and backward and the main benefit of this carriage is that it is very easy to break down four by eight sheets of plywood.
One of the things I like most about this saw is that the fence has to flip stops, and this is really nice because I can cut a piece to both length and width by just lifting or lowering the appropriate flip stop with all the panel's cut out. It's time to do some edge banding and for this project, I have chosen to use fast cap, speed tape, and edge banding and a fast car. Speed tape is really just double sided tape.
That's designed for the application of edge banding and I chose to use edge banding because I had a roll of it lying around and it's a little more durable than the iron-on melamine edge banding. So I think one of the coolest things about this method. Is it really doesn't require too many tools? You just need an end, trimmer j-roller that I'm using here and a side trimmer and a mil file, and you can really get some excellent results and these end trimmers work great just about perfect results.
Any content, trademark’s, or other material that might be found on the kristinreiter.com website that is not kristinreiter.com’s property remains the copyright of its respective owner/s. In no way does kristinreiter.com claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2019 kristinreiter.com. All Rights Reserved.